# Trying to run Blaze examples

**URL:** <https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354>\
**Category:** Community Support\
**Created:** [February 24, 2015, 2:22pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354 "2015-02-24T14:22:12Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 24, 2015, 2:22pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/1 "2015-02-24T14:22:12Z")

</div>

Hi all

Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"

But when starting the server I get the following error messages:

"

> C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.

> This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)

"

This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?

Can anyone help succeed in executing the examples?

Kind regards

Mads

---

<div class="post-metadata">

**Author:** ![Bryan](https://discourse.bokeh.org/user_avatar/discourse.bokeh.org/bryan/32/3625_2.png) [@Bryan](https://discourse.bokeh.org/u/Bryan)\
**Post date:** [February 24, 2015, 2:32pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/2 "2015-02-24T14:32:02Z")

</div>

Hi Mads,

This package is currently available on binstar.org:

&nbsp;&nbsp;[https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)

Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just "blaze-server").

Thanks,

Bryan

> **···**
>
> > On Feb 24, 2015, at 8:22 AM, Mads Berre \<mads.berre@gmail.com\> wrote:
> > 
> > Hi all
> > 
> > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server\"
> > 
> > But when starting the server I get the following error messages:
> > 
> > "  
> > C:\Anaconda\lib\site-packages\bokeh\server\blaze\_\_init\_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.  
> > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)  
> > "
> > 
> > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > 
> > Can anyone help succeed in executing the examples?
> > 
> > Kind regards  
> > Mads
> > 
> > --  
> > You received this message because you are subscribed to the Google Groups "Bokeh Discussion - Public" group.  
> > To unsubscribe from this group and stop receiving emails from it, send an email to bokeh+unsubscribe@continuum.io.  
> > To post to this group, send email to bokeh@continuum.io.  
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io\](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io%5C).  
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout\](https://groups.google.com/a/continuum.io/d/optout%5C).

---

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 24, 2015, 2:55pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/3 "2015-02-24T14:55:46Z")

</div>

Thanks Bryan,

That helped a lot!

I don’t mind that it will change just want to see if this is a feature that i can use.

I ran into a new problem:

I have started a Bokeh server and executed census.py

from the server I get:

c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost

Bokeh Server Configuration

> **···**
>
> ==========================
> 
> python version : 2.7.8
> 
> bokeh version : 0.8.1
> 
> listening : localhost:5006
> 
> backend : shelve
> 
> python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> js options : splitjs:OFF, debugjs:OFF
> 
> INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> and from the script I get:
> 
> c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> To override, pass ‘load\_from\_config=False’ to Session
> 
> INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> INFO:bokeh.session:got read write apikey
> 
> INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> Traceback (most recent call last):
> 
> File “census.py”, line 10, in
> 
> d = Data(c)
> 
> File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> dshape = discover(data)
> 
> File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> in **call**
> 
> return func(\*args, \*\*kwargs)
> 
> File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> return c.dshape
> 
> File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> raise ValueError(“Bad Response: %s” % reason(response))
> 
> ValueError: Bad Response: NOT FOUND
> 
> Any clue what I did wrong?
> 
> Thanks
> 
> Mads
> 
> Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> 
> > Hi Mads,
> > 
> > This package is currently available on [binstar.org](http://binstar.org):
> > 
> > ```
> > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > 
> > ```
> > 
> > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > 
> > Thanks,
> > 
> > Bryan
> > 
> > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > 
> > > Hi all
> > 
> > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > 
> > > But when starting the server I get the following error messages:
> > 
> > > "
> > 
> > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > 
> > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > 
> > > "
> > 
> > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > 
> > > Can anyone help succeed in executing the examples?
> > 
> > > Kind regards
> > 
> > > Mads
> > > 
> > > –  
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > 
> > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).

---

<div class="post-metadata">

**Author:** ![Hugo\_Shi](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/h/22d042/32.png) [@Hugo\_Shi](https://discourse.bokeh.org/u/Hugo_Shi)\
**Post date:** [February 24, 2015, 3:02pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/4 "2015-02-24T15:02:11Z")

</div>

Also i should have docs completed for this by the end of the week

> **···**
>
> On Feb 24, 2015 9:55 AM, “Mads Berre” [mads.berre@gmail.com](mailto:mads.berre@gmail.com) wrote:
> 
> > Thanks Bryan,
> 
> > That helped a lot!
> 
> > 
> 
> > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > 
> 
> > I ran into a new problem:
> 
> > 
> 
> > I have started a Bokeh server and executed census.py
> 
> > from the server I get:
> 
> > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > 
> 
> > Bokeh Server Configuration
> 
> > ==========================
> 
> > python version : 2.7.8
> 
> > bokeh version : 0.8.1
> 
> > listening : localhost:5006
> 
> > backend : shelve
> 
> > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > js options : splitjs:OFF, debugjs:OFF
> 
> > 
> 
> > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > 
> 
> > and from the script I get:
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > To override, pass ‘load\_from\_config=False’ to Session
> 
> > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > INFO:bokeh.session:got read write apikey
> 
> > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > Traceback (most recent call last):
> 
> > File “census.py”, line 10, in
> 
> > d = Data(c)
> 
> > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > dshape = discover(data)
> 
> > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > in **call**
> 
> > return func(\*args, \*\*kwargs)
> 
> > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > return c.dshape
> 
> > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > ValueError: Bad Response: NOT FOUND
> 
> > 
> 
> > 
> 
> > Any clue what I did wrong?
> 
> > 
> 
> > Thanks
> 
> > Mads
> 
> > 
> 
> > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > 
> > > Hi Mads,
> > > 
> > > This package is currently available on [binstar.org](http://binstar.org):
> > > 
> > > ```
> > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > 
> > > ```
> > > 
> > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > 
> > > Thanks,
> > > 
> > > Bryan
> > > 
> > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > 
> > > > Hi all
> > > 
> > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > 
> > > > But when starting the server I get the following error messages:
> > > 
> > > > "
> > > 
> > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > 
> > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > 
> > > > "
> > > 
> > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > 
> > > > Can anyone help succeed in executing the examples?
> > > 
> > > > Kind regards
> > > 
> > > > Mads
> > > > 
> > > > –  
> > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > 
> > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > 
> > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > 
> > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > 
> > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> > 
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > 
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).

---

<div class="post-metadata">

**Author:** ![Damian\_Avila](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/d/6a8cbe/32.png) [@Damian\_Avila](https://discourse.bokeh.org/u/Damian_Avila)\
**Post date:** [February 24, 2015, 9:09pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/5 "2015-02-24T21:09:54Z")

</div>

census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?

> **···**
>
> On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo.r.shi@gmail.com](mailto:hugo.r.shi@gmail.com) wrote:
> 
> > Also i should have docs completed for this by the end of the week
> 
> > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads.berre@gmail.com](mailto:mads.berre@gmail.com) wrote:
> > 
> > > Thanks Bryan,
> 
> > > That helped a lot!
> 
> > >
> 
> > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > >
> 
> > > I ran into a new problem:
> 
> > >
> 
> > > I have started a Bokeh server and executed census.py
> 
> > > from the server I get:
> 
> > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > >
> 
> > > Bokeh Server Configuration
> 
> > > ==========================
> 
> > > python version : 2.7.8
> 
> > > bokeh version : 0.8.1
> 
> > > listening : localhost:5006
> 
> > > backend : shelve
> 
> > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > js options : splitjs:OFF, debugjs:OFF
> 
> > >
> 
> > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > >
> 
> > > and from the script I get:
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > INFO:bokeh.session:got read write apikey
> 
> > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > Traceback (most recent call last):
> 
> > > File “census.py”, line 10, in
> 
> > > d = Data(c)
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > dshape = discover(data)
> 
> > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > in **call**
> 
> > > return func(\*args, \*\*kwargs)
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > return c.dshape
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > ValueError: Bad Response: NOT FOUND
> 
> > >
> 
> > >
> 
> > > Any clue what I did wrong?
> 
> > >
> 
> > > Thanks
> 
> > > Mads
> 
> > >
> 
> > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > 
> > > > Hi Mads,
> > > > 
> > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > 
> > > > ```
> > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > 
> > > > ```
> > > > 
> > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > 
> > > > Thanks,
> > > > 
> > > > Bryan
> > > > 
> > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > 
> > > > > Hi all
> > > > 
> > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > 
> > > > > But when starting the server I get the following error messages:
> > > > 
> > > > > "
> > > > 
> > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > 
> > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > 
> > > > > "
> > > > 
> > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > 
> > > > > Can anyone help succeed in executing the examples?
> > > > 
> > > > > Kind regards
> > > > 
> > > > > Mads
> > > > > 
> > > > > –  
> > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > 
> > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > 
> > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > 
> > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > > 
> > > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> > > 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > 
> > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> 
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > 
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> –
> 
> _Damián Avila_
> 
> _Continuum Analytics_
> 
> _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 25, 2015, 6:42am UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/6 "2015-02-25T06:42:32Z")

</div>

Thanks Damian,

And if understand correct this only works on Linux and OSx??

I am trying to get either of these to work:

- abstractrender.py

- census.py

- remote\_image.py

- blaze\_source.py

- serversource.py

For the top three first i get the ValueError: Bad Response: NOT FOUND.

For the blaze\_source.py I get the following error:

c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py

Traceback (most recent call last):

File “blaze\_source.py”, line 9, in

from blaze import data

File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul

> 

from .core import \*

File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in

from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index

File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in

from datashape.predicates import isunit, isdimension

ImportError: cannot import name isunit

c:\Anaconda\Examples\bokeh\plotting\server\>

``

For the serversource.py i get the following error:

c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py

Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)

To override, pass ‘load\_from\_config=False’ to Session

INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost

INFO:bokeh.session:got read write apikey

Traceback (most recent call last):

File “serversource.py”, line 11, in

output\_server(“remotedata”)

File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server

session.load\_document(curdoc())

File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document

self.gc()

File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc

self.post\_json(url)

File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json

return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)

File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json

return utils.get\_json(resp)

File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json

return response.json()

File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json

return json.loads(self.text, \*\*kwargs)

File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads

return \_default\_decoder.decode(s)

File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode

obj, end = self.raw\_decode(s)

File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode

return self.scan\_once(s, idx=\_w(s, idx).end())

simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

c:\Anaconda\Examples\bokeh\plotting\server\>

``

Thank you all for your fast response and interest in helping me, very much appreciated!

Thanks

Mads

> **···**
>
> Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> 
> > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > 
> > > Also i should have docs completed for this by the end of the week
> 
> > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > 
> > > > Thanks Bryan,
> 
> > > > That helped a lot!
> 
> > > >
> 
> > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > >
> 
> > > > I ran into a new problem:
> 
> > > >
> 
> > > > I have started a Bokeh server and executed census.py
> 
> > > > from the server I get:
> 
> > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > >
> 
> > > > Bokeh Server Configuration
> 
> > > > ==========================
> 
> > > > python version : 2.7.8
> 
> > > > bokeh version : 0.8.1
> 
> > > > listening : localhost:5006
> 
> > > > backend : shelve
> 
> > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > >
> 
> > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > >
> 
> > > > and from the script I get:
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > INFO:bokeh.session:got read write apikey
> 
> > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > Traceback (most recent call last):
> 
> > > > File “census.py”, line 10, in
> 
> > > > d = Data(c)
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > dshape = discover(data)
> 
> > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > in **call**
> 
> > > > return func(\*args, \*\*kwargs)
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > return c.dshape
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > ValueError: Bad Response: NOT FOUND
> 
> > > >
> 
> > > >
> 
> > > > Any clue what I did wrong?
> 
> > > >
> 
> > > > Thanks
> 
> > > > Mads
> 
> > > >
> 
> > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > 
> > > > > Hi Mads,
> > > > > 
> > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > 
> > > > > ```
> > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > 
> > > > > ```
> > > > > 
> > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > 
> > > > > Thanks,
> > > > > 
> > > > > Bryan
> > > > > 
> > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > 
> > > > > > Hi all
> > > > > 
> > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > 
> > > > > > But when starting the server I get the following error messages:
> > > > > 
> > > > > > "
> > > > > 
> > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > 
> > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > 
> > > > > > "
> > > > > 
> > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > 
> > > > > > Can anyone help succeed in executing the examples?
> > > > > 
> > > > > > Kind regards
> > > > > 
> > > > > > Mads
> > > > > > 
> > > > > > –  
> > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > 
> > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > 
> > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > 
> > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > 
> > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > –
> > > > 
> > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > 
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > 
> > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > 
> > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > 
> > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > 
> > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > 
> 
> > –  
> > _Damián Avila_
> 
> > _Continuum Analytics_
> 
> > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Damian\_Avila](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/d/6a8cbe/32.png) [@Damian\_Avila](https://discourse.bokeh.org/u/Damian_Avila)\
**Post date:** [February 25, 2015, 1:52pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/7 "2015-02-25T13:52:41Z")

</div>

Several things…

1. Can you post the conda list from your env to check if all the dependencies are there?

2. Can you try using the bokeh-server with the memory backend instead of shelve?

AFAIK, this should work in windows too…

Cheers.

> **···**
>
> On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads.berre@gmail.com](mailto:mads.berre@gmail.com) wrote:
> 
> > Thanks Damian,
> 
> > And if understand correct this only works on Linux and OSx??
> 
> > 
> 
> > I am trying to get either of these to work:
> 
> > - abstractrender.py
> 
> > - census.py
> 
> > - remote\_image.py
> 
> > - blaze\_source.py
> 
> > - serversource.py
> 
> > 
> 
> > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > For the blaze\_source.py I get the following error:
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > Traceback (most recent call last):
> 
> > File “blaze\_source.py”, line 9, in
> 
> > from blaze import data
> 
> > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > e\>
> 
> > from .core import \*
> 
> > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > from datashape.predicates import isunit, isdimension
> 
> > ImportError: cannot import name isunit
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > ``
> 
> > 
> 
> > For the serversource.py i get the following error:
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > To override, pass ‘load\_from\_config=False’ to Session
> 
> > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > INFO:bokeh.session:got read write apikey
> 
> > Traceback (most recent call last):
> 
> > File “serversource.py”, line 11, in
> 
> > output\_server(“remotedata”)
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > session.load\_document(curdoc())
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > self.gc()
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > self.post\_json(url)
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > return utils.get\_json(resp)
> 
> > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > return response.json()
> 
> > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > return json.loads(self.text, \*\*kwargs)
> 
> > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > return \_default\_decoder.decode(s)
> 
> > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > obj, end = self.raw\_decode(s)
> 
> > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > ``
> 
> > 
> 
> > 
> 
> > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > 
> 
> > Thanks
> 
> > Mads
> 
> > 
> 
> > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > 
> > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > 
> > > > Also i should have docs completed for this by the end of the week
> 
> > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > Thanks Bryan,
> 
> > > > > That helped a lot!
> 
> > > > >
> 
> > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > >
> 
> > > > > I ran into a new problem:
> 
> > > > >
> 
> > > > > I have started a Bokeh server and executed census.py
> 
> > > > > from the server I get:
> 
> > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > >
> 
> > > > > Bokeh Server Configuration
> 
> > > > > ==========================
> 
> > > > > python version : 2.7.8
> 
> > > > > bokeh version : 0.8.1
> 
> > > > > listening : localhost:5006
> 
> > > > > backend : shelve
> 
> > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > >
> 
> > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > >
> 
> > > > > and from the script I get:
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > Traceback (most recent call last):
> 
> > > > > File “census.py”, line 10, in
> 
> > > > > d = Data(c)
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > dshape = discover(data)
> 
> > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > in **call**
> 
> > > > > return func(\*args, \*\*kwargs)
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > return c.dshape
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > >
> 
> > > > >
> 
> > > > > Any clue what I did wrong?
> 
> > > > >
> 
> > > > > Thanks
> 
> > > > > Mads
> 
> > > > >
> 
> > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > 
> > > > > > Hi Mads,
> > > > > > 
> > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > 
> > > > > > ```
> > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > 
> > > > > > ```
> > > > > > 
> > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > 
> > > > > > Thanks,
> > > > > > 
> > > > > > Bryan
> > > > > > 
> > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > 
> > > > > > > Hi all
> > > > > > 
> > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > 
> > > > > > > But when starting the server I get the following error messages:
> > > > > > 
> > > > > > > "
> > > > > > 
> > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > 
> > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > 
> > > > > > > "
> > > > > > 
> > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > 
> > > > > > > Can anyone help succeed in executing the examples?
> > > > > > 
> > > > > > > Kind regards
> > > > > > 
> > > > > > > Mads
> > > > > > > 
> > > > > > > –  
> > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > 
> > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > 
> > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > 
> > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > 
> > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > –
> > > > > 
> > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > 
> > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > 
> > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > –
> > > > 
> > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > 
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > 
> > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > 
> > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > >
> 
> > > –  
> > > _Damián Avila_
> 
> > > _Continuum Analytics_
> 
> > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > 
> > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> > 
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > 
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> –
> 
> _Damián Avila_
> 
> _Continuum Analytics_
> 
> _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 26, 2015, 7:29am UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/8 "2015-02-26T07:29:43Z")

</div>

Hi Damián

1. Attached is the conda list.
2. That does not seem to change anything,

I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?

c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering

Run ‘binstar show \<USER/PACKAGE\>’ to get more details:

Packages:

```
                      Name | Access | Package Types | Summary

 ------------------------- | ------------ | --------------- | --------------

```

[conda\_list.txt](https://discourse-uploads.bokeh.org/original/1X/08db4c7511aded4fe6653955bc8d5c5704d87bc9.txt) (7.24 KB)

> **···**
>
> * * *
> 
> ```
> anaconda/abstract-rendering | public | conda | <Undefined>
> 
> ilan/abstract-rendering | public | conda | None
> 
> ```
> 
> Found 2 packages
> 
> c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> Name: abstract-rendering
> 
> Summary:
> 
> Access: public
> 
> Package Types: conda
> 
> Versions:
> 
> - 0.4.0
> 
> - 0.5.0
> 
> - 0.5.1
> 
> - 0.3.1
> 
> - 0.1.0
> 
> To install this package with conda run:
> 
> ```
> conda install --channel https://conda.binstar.org/anaconda abstract-rendering
> 
> ```
> 
> c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [anaconda :: Anaconda.org](https://conda.binstar.org/anaconda) abstract-rendering
> 
> Fetching package metadata: …
> 
> Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> You can search for this package on Binstar with
> 
> ```
> binstar search -t conda abstract-rendering
> 
> ```
> 
> c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> ``
> 
> Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> 
> > Several things…
> 
> > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > 
> 
> > AFAIK, this should work in windows too…
> 
> > 
> 
> > Cheers.
> 
> > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > 
> > > Thanks Damian,
> 
> > > And if understand correct this only works on Linux and OSx??
> 
> > >
> 
> > > I am trying to get either of these to work:
> 
> > > - abstractrender.py
> 
> > > - census.py
> 
> > > - remote\_image.py
> 
> > > - blaze\_source.py
> 
> > > - serversource.py
> 
> > >
> 
> > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > For the blaze\_source.py I get the following error:
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > Traceback (most recent call last):
> 
> > > File “blaze\_source.py”, line 9, in
> 
> > > from blaze import data
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > >
> 
> > > from .core import \*
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > from datashape.predicates import isunit, isdimension
> 
> > > ImportError: cannot import name isunit
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > ``
> 
> > >
> 
> > > For the serversource.py i get the following error:
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > INFO:bokeh.session:got read write apikey
> 
> > > Traceback (most recent call last):
> 
> > > File “serversource.py”, line 11, in
> 
> > > output\_server(“remotedata”)
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > session.load\_document(curdoc())
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > self.gc()
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > self.post\_json(url)
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > return utils.get\_json(resp)
> 
> > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > return response.json()
> 
> > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > return json.loads(self.text, \*\*kwargs)
> 
> > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > return \_default\_decoder.decode(s)
> 
> > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > obj, end = self.raw\_decode(s)
> 
> > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > ``
> 
> > >
> 
> > >
> 
> > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > >
> 
> > > Thanks
> 
> > > Mads
> 
> > >
> 
> > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > 
> > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > 
> > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > Thanks Bryan,
> 
> > > > > > That helped a lot!
> 
> > > > > >
> 
> > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > >
> 
> > > > > > I ran into a new problem:
> 
> > > > > >
> 
> > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > from the server I get:
> 
> > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > >
> 
> > > > > > Bokeh Server Configuration
> 
> > > > > > ==========================
> 
> > > > > > python version : 2.7.8
> 
> > > > > > bokeh version : 0.8.1
> 
> > > > > > listening : localhost:5006
> 
> > > > > > backend : shelve
> 
> > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > >
> 
> > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > >
> 
> > > > > > and from the script I get:
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > Traceback (most recent call last):
> 
> > > > > > File “census.py”, line 10, in
> 
> > > > > > d = Data(c)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > dshape = discover(data)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > in **call**
> 
> > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > return c.dshape
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > Any clue what I did wrong?
> 
> > > > > >
> 
> > > > > > Thanks
> 
> > > > > > Mads
> 
> > > > > >
> 
> > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > 
> > > > > > > Hi Mads,
> > > > > > > 
> > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > 
> > > > > > > ```
> > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > 
> > > > > > > ```
> > > > > > > 
> > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > 
> > > > > > > Thanks,
> > > > > > > 
> > > > > > > Bryan
> > > > > > > 
> > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > 
> > > > > > > > Hi all
> > > > > > > 
> > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > 
> > > > > > > > But when starting the server I get the following error messages:
> > > > > > > 
> > > > > > > > "
> > > > > > > 
> > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > 
> > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > 
> > > > > > > > "
> > > > > > > 
> > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > 
> > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > 
> > > > > > > > Kind regards
> > > > > > > 
> > > > > > > > Mads
> > > > > > > > 
> > > > > > > > –  
> > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > 
> > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > 
> > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > 
> > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > 
> > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > –
> > > > > > 
> > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > 
> > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > 
> > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > 
> > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > –
> > > > > 
> > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > 
> > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > 
> > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > >
> 
> > > > –  
> > > > _Damián Avila_
> 
> > > > _Continuum Analytics_
> 
> > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > 
> > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > 
> 
> > –  
> > _Damián Avila_
> 
> > _Continuum Analytics_
> 
> > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Damian\_Avila](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/d/6a8cbe/32.png) [@Damian\_Avila](https://discourse.bokeh.org/u/Damian_Avila)\
**Post date:** [February 26, 2015, 1:02pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/9 "2015-02-26T13:02:27Z")

</div>

OK, 2 things:

1- You need to update blaze to the latest version, if will no work with previous versions

2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:

pip install abstract\_rendering

> **···**
>
> Please, let me know any update…
> 
> Thanks!
> 
> On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads.berre@gmail.com](mailto:mads.berre@gmail.com) wrote:
> 
> > Hi Damián
> 
> > 
> 
> > 1. Attached is the conda list.
> > 2. That does not seem to change anything,
> 
> > 
> 
> > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > Packages:
> 
> > ```
> > Name | Access | Package Types | Summary
> > 
> > ```
> 
> > 
> 
> > ```
> > ------------------------- | ------------ | --------------- | --------------
> > 
> > ```
> 
> > * * *
> 
> > ```
> > anaconda/abstract-rendering | public | conda | <Undefined>
> > 
> > ```
> 
> > 
> 
> > ```
> > ilan/abstract-rendering | public | conda | None
> > 
> > ```
> 
> > 
> 
> > Found 2 packages
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > Name: abstract-rendering
> 
> > Summary:
> 
> > Access: public
> 
> > Package Types: conda
> 
> > Versions:
> 
> > - 0.4.0
> 
> > - 0.5.0
> 
> > - 0.5.1
> 
> > - 0.3.1
> 
> > - 0.1.0
> 
> > 
> 
> > To install this package with conda run:
> 
> > ```
> > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > 
> > ```
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > Fetching package metadata: …
> 
> > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > 
> 
> > 
> 
> > You can search for this package on Binstar with
> 
> > 
> 
> > ```
> > binstar search -t conda abstract-rendering
> > 
> > ```
> 
> > 
> 
> > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > 
> 
> > ``
> 
> > 
> 
> > 
> 
> > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > 
> > > Several things…
> 
> > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > >
> 
> > > AFAIK, this should work in windows too…
> 
> > >
> 
> > > Cheers.
> 
> > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > Thanks Damian,
> 
> > > > And if understand correct this only works on Linux and OSx??
> 
> > > >
> 
> > > > I am trying to get either of these to work:
> 
> > > > - abstractrender.py
> 
> > > > - census.py
> 
> > > > - remote\_image.py
> 
> > > > - blaze\_source.py
> 
> > > > - serversource.py
> 
> > > >
> 
> > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > For the blaze\_source.py I get the following error:
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > Traceback (most recent call last):
> 
> > > > File “blaze\_source.py”, line 9, in
> 
> > > > from blaze import data
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > e\>
> 
> > > > from .core import \*
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > from datashape.predicates import isunit, isdimension
> 
> > > > ImportError: cannot import name isunit
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > ``
> 
> > > >
> 
> > > > For the serversource.py i get the following error:
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > INFO:bokeh.session:got read write apikey
> 
> > > > Traceback (most recent call last):
> 
> > > > File “serversource.py”, line 11, in
> 
> > > > output\_server(“remotedata”)
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > session.load\_document(curdoc())
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > self.gc()
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > self.post\_json(url)
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > return utils.get\_json(resp)
> 
> > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > return response.json()
> 
> > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > return \_default\_decoder.decode(s)
> 
> > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > obj, end = self.raw\_decode(s)
> 
> > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > ``
> 
> > > >
> 
> > > >
> 
> > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > >
> 
> > > > Thanks
> 
> > > > Mads
> 
> > > >
> 
> > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > 
> > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > 
> > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > Thanks Bryan,
> 
> > > > > > > That helped a lot!
> 
> > > > > > >
> 
> > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > >
> 
> > > > > > > I ran into a new problem:
> 
> > > > > > >
> 
> > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > from the server I get:
> 
> > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > >
> 
> > > > > > > Bokeh Server Configuration
> 
> > > > > > > ==========================
> 
> > > > > > > python version : 2.7.8
> 
> > > > > > > bokeh version : 0.8.1
> 
> > > > > > > listening : localhost:5006
> 
> > > > > > > backend : shelve
> 
> > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > >
> 
> > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > >
> 
> > > > > > > and from the script I get:
> 
> > > > > > >
> 
> > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > Traceback (most recent call last):
> 
> > > > > > > File “census.py”, line 10, in
> 
> > > > > > > d = Data(c)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > dshape = discover(data)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > in **call**
> 
> > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > return c.dshape
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > >
> 
> > > > > > >
> 
> > > > > > > Any clue what I did wrong?
> 
> > > > > > >
> 
> > > > > > > Thanks
> 
> > > > > > > Mads
> 
> > > > > > >
> 
> > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > 
> > > > > > > > Hi Mads,
> > > > > > > > 
> > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > 
> > > > > > > > ```
> > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > 
> > > > > > > > ```
> > > > > > > > 
> > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > 
> > > > > > > > Thanks,
> > > > > > > > 
> > > > > > > > Bryan
> > > > > > > > 
> > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > 
> > > > > > > > > Hi all
> > > > > > > > 
> > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > 
> > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > 
> > > > > > > > > "
> > > > > > > > 
> > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > 
> > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > 
> > > > > > > > > "
> > > > > > > > 
> > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > 
> > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > 
> > > > > > > > > Kind regards
> > > > > > > > 
> > > > > > > > > Mads
> > > > > > > > > 
> > > > > > > > > –  
> > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > 
> > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > 
> > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > 
> > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > 
> > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > –
> > > > > > > 
> > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > 
> > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > 
> > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > 
> > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > –
> > > > > > 
> > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > 
> > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > 
> > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > 
> > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > >
> 
> > > > > –  
> > > > > _Damián Avila_
> 
> > > > > _Continuum Analytics_
> 
> > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > –
> > > > 
> > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > 
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > 
> > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > > > 
> > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > >
> 
> > > –  
> > > _Damián Avila_
> 
> > > _Continuum Analytics_
> 
> > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > 
> > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> > 
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io?utm_medium=email&utm_source=footer).
> > 
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> –  
> _Damián Avila_
> 
> _Continuum Analytics_
> 
> _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 27, 2015, 6:35am UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/10 "2015-02-27T06:35:02Z")

</div>

Hi Damián,

Thanks for you support!

I have successfully updated blaze. After updating blaze i now get the same error messease for the blaze\_source.py example, as for the others.

Still having problems with abstract\_rendering, using pip i get the following error:

C:\Users\mbe\>pip install abstract\_rendering

``  
Collecting abstract-rendering

Downloading abstract\_rendering-0.5.1.tar.gz

Installing collected packages: abstract-rendering

Running setup.py install for abstract-rendering

```
building 'abstract_rendering.transform' extension

C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include

```

-IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7

\Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI

C -lstdc++

```
abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all

```

code is position independent) [enabled by default]

```
C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R

```

elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_

rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2

7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd

```
Cannot export inittransform: symbol not defined

collect2.exe: error: ld returned 1 exit status

error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1

Complete output from command C:\Anaconda\python.exe -c "import setuptools, t

```

okenize; **file** ='c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\abstra

ct-rendering\setup.py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).r

ead().replace(‘\r\n’, ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\a

ppdata\local\temp\pip-4\_njso-record\install-record.txt --single-version-external

ly-managed --compile:

```
running install

running build

running build_py

creating build

creating build\lib.win-amd64-2.7

creating build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\categories.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\contour.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\core.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\fast_project.py -> build\lib.win-amd64-2.7\abstra

```

ct\_rendering

```
copying abstract_rendering\general.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\geometry.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\glyphset.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\infos.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\numeric.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\numpyglyphs.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\util.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\ __init__.py -> build\lib.win-amd64-2.7\abstract_rendering

copying abstract_rendering\_version.txt -> build\lib.win-amd64-2.7\abstract_rendering

running build_ext

building 'abstract_rendering.transform' extension

creating build\temp.win-amd64-2.7

creating build\temp.win-amd64-2.7\Release

creating build\temp.win-amd64-2.7\Release\abstract_rendering

C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include

```

-IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7

\Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI

C -lstdc++

```
abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all

```

code is position independent) [enabled by default]

```
writing build\temp.win-amd64-2.7\Release\abstract_rendering\transform.def

C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R

```

elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_

rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2

7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd

```
Cannot export inittransform: symbol not defined

collect2.exe: error: ld returned 1 exit status

error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1

```

> **···**
>
> ```
> ----------------------------------------
> 
> Command "C:\Anaconda\python.exe -c "import setuptools, tokenize; __file__ ='c:
> 
> ```
> 
> \users\mbe\appdata\local\temp\pip-build-uxz4dm\abstract-rendering\setup.
> 
> py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).read().replace(‘\r\n’
> 
> , ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\appdata\local\temp\pi
> 
> p-4\_njso-record\install-record.txt --single-version-externally-managed --compile
> 
> " failed with error code 1 in c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\a
> 
> bstract-rendering
> 
> Kind regards
> 
> Mads
> 
> Den torsdag den 26. februar 2015 kl. 14.02.29 UTC+1 skrev Damian Avila:
> 
> > OK, 2 things:
> 
> > 1- You need to update blaze to the latest version, if will no work with previous versions
> 
> > 2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:
> 
> > 
> 
> > pip install abstract\_rendering
> 
> > 
> 
> > Please, let me know any update…
> 
> > 
> 
> > Thanks!
> 
> > 
> 
> > On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > 
> > > Hi Damián
> 
> > >
> 
> > > 1. Attached is the conda list.
> > > 2. That does not seem to change anything,
> 
> > >
> 
> > > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > > Packages:
> 
> > > ```
> > > Name | Access | Package Types | Summary
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > ------------------------- | ------------ | --------------- | --------------
> > > 
> > > ```
> 
> > > * * *
> 
> > > ```
> > > anaconda/abstract-rendering | public | conda | <Undefined>
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > ilan/abstract-rendering | public | conda | None
> > > 
> > > ```
> 
> > >
> 
> > > Found 2 packages
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > > Name: abstract-rendering
> 
> > > Summary:
> 
> > > Access: public
> 
> > > Package Types: conda
> 
> > > Versions:
> 
> > > - 0.4.0
> 
> > > - 0.5.0
> 
> > > - 0.5.1
> 
> > > - 0.3.1
> 
> > > - 0.1.0
> 
> > >
> 
> > > To install this package with conda run:
> 
> > > ```
> > > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > > 
> > > ```
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > > Fetching package metadata: …
> 
> > > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > >
> 
> > >
> 
> > > You can search for this package on Binstar with
> 
> > >
> 
> > > ```
> > > binstar search -t conda abstract-rendering
> > > 
> > > ```
> 
> > >
> 
> > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > >
> 
> > > ``
> 
> > >
> 
> > >
> 
> > > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > > 
> > > > Several things…
> 
> > > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > > >
> 
> > > > AFAIK, this should work in windows too…
> 
> > > >
> 
> > > > Cheers.
> 
> > > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > Thanks Damian,
> 
> > > > > And if understand correct this only works on Linux and OSx??
> 
> > > > >
> 
> > > > > I am trying to get either of these to work:
> 
> > > > > - abstractrender.py
> 
> > > > > - census.py
> 
> > > > > - remote\_image.py
> 
> > > > > - blaze\_source.py
> 
> > > > > - serversource.py
> 
> > > > >
> 
> > > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > > For the blaze\_source.py I get the following error:
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > > Traceback (most recent call last):
> 
> > > > > File “blaze\_source.py”, line 9, in
> 
> > > > > from blaze import data
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > > >
> 
> > > > > from .core import \*
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > > from datashape.predicates import isunit, isdimension
> 
> > > > > ImportError: cannot import name isunit
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > ``
> 
> > > > >
> 
> > > > > For the serversource.py i get the following error:
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > Traceback (most recent call last):
> 
> > > > > File “serversource.py”, line 11, in
> 
> > > > > output\_server(“remotedata”)
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > > session.load\_document(curdoc())
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > > self.gc()
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > > self.post\_json(url)
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > > return utils.get\_json(resp)
> 
> > > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > > return response.json()
> 
> > > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > > return \_default\_decoder.decode(s)
> 
> > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > > obj, end = self.raw\_decode(s)
> 
> > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > ``
> 
> > > > >
> 
> > > > >
> 
> > > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > > >
> 
> > > > > Thanks
> 
> > > > > Mads
> 
> > > > >
> 
> > > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > > 
> > > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > > 
> > > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > Thanks Bryan,
> 
> > > > > > > > That helped a lot!
> 
> > > > > > > >
> 
> > > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > > >
> 
> > > > > > > > I ran into a new problem:
> 
> > > > > > > >
> 
> > > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > > from the server I get:
> 
> > > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > > >
> 
> > > > > > > > Bokeh Server Configuration
> 
> > > > > > > > ==========================
> 
> > > > > > > > python version : 2.7.8
> 
> > > > > > > > bokeh version : 0.8.1
> 
> > > > > > > > listening : localhost:5006
> 
> > > > > > > > backend : shelve
> 
> > > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > > >
> 
> > > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > > >
> 
> > > > > > > > and from the script I get:
> 
> > > > > > > >
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > File “census.py”, line 10, in
> 
> > > > > > > > d = Data(c)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > > dshape = discover(data)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > > in **call**
> 
> > > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > > return c.dshape
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > > >
> 
> > > > > > > >
> 
> > > > > > > > Any clue what I did wrong?
> 
> > > > > > > >
> 
> > > > > > > > Thanks
> 
> > > > > > > > Mads
> 
> > > > > > > >
> 
> > > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > > 
> > > > > > > > > Hi Mads,
> > > > > > > > > 
> > > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > > 
> > > > > > > > > ```
> > > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > > 
> > > > > > > > > ```
> > > > > > > > > 
> > > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > > 
> > > > > > > > > Thanks,
> > > > > > > > > 
> > > > > > > > > Bryan
> > > > > > > > > 
> > > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > > 
> > > > > > > > > > Hi all
> > > > > > > > > 
> > > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > > 
> > > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > > 
> > > > > > > > > > "
> > > > > > > > > 
> > > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > > 
> > > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > > 
> > > > > > > > > > "
> > > > > > > > > 
> > > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > > 
> > > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > > 
> > > > > > > > > > Kind regards
> > > > > > > > > 
> > > > > > > > > > Mads
> > > > > > > > > > 
> > > > > > > > > > –  
> > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > 
> > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > 
> > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > > 
> > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > > 
> > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > –
> > > > > > > > 
> > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > 
> > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > 
> > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > > 
> > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > –
> > > > > > > 
> > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > 
> > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > 
> > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > > 
> > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > >
> 
> > > > > > –  
> > > > > > _Damián Avila_
> 
> > > > > > _Continuum Analytics_
> 
> > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > > –
> > > > > 
> > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > 
> > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > 
> > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > >
> 
> > > > –  
> > > > _Damián Avila_
> 
> > > > _Continuum Analytics_
> 
> > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > 
> > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io?utm_medium=email&utm_source=footer).
> > > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > 
> 
> > –  
> > _Damián Avila_
> 
> > _Continuum Analytics_
> 
> > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Damian\_Avila](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/d/6a8cbe/32.png) [@Damian\_Avila](https://discourse.bokeh.org/u/Damian_Avila)\
**Post date:** [February 27, 2015, 11:09am UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/11 "2015-02-27T11:09:42Z")

</div>

The problem, I guess, should be the missing AR package… people is replicating your AR building problem on windows, so you are not alone 😉  
We will provide win conda packages for AR soon… I guess you will need to wait a little bit for it.

Btw, thanks for keep trying and let you know the problems you had.

Cheers.

> **···**
>
> On Fri, Feb 27, 2015 at 3:35 AM, Mads Berre [mads.berre@gmail.com](mailto:mads.berre@gmail.com) wrote:
> 
> > Hi Damián,
> 
> > 
> 
> > Thanks for you support!
> 
> > 
> 
> > I have successfully updated blaze. After updating blaze i now get the same error messease for the blaze\_source.py example, as for the others.
> > 
> > Still having problems with abstract\_rendering, using pip i get the following error:
> 
> > C:\Users\mbe\>pip install abstract\_rendering
> 
> > ``  
> > Collecting abstract-rendering
> 
> > Downloading abstract\_rendering-0.5.1.tar.gz
> 
> > Installing collected packages: abstract-rendering
> 
> > Running setup.py install for abstract-rendering
> 
> > ```
> > building 'abstract_rendering.transform' extension
> > 
> > ```
> 
> > ```
> > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > 
> > ```
> 
> > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > C -lstdc++
> 
> > ```
> > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > 
> > ```
> 
> > code is position independent) [enabled by default]
> 
> > ```
> > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > 
> > ```
> 
> > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > ```
> > Cannot export inittransform: symbol not defined
> > 
> > ```
> 
> > ```
> > collect2.exe: error: ld returned 1 exit status
> > 
> > ```
> 
> > ```
> > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > 
> > ```
> 
> > ```
> > Complete output from command C:\Anaconda\python.exe -c "import setuptools, t
> > 
> > ```
> 
> > okenize; **file** ='c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\abstra
> 
> > ct-rendering\setup.py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).r
> 
> > ead().replace(‘\r\n’, ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\a
> 
> > ppdata\local\temp\pip-4\_njso-record\install-record.txt --single-version-external
> 
> > ly-managed --compile:
> 
> > ```
> > running install
> > 
> > ```
> 
> > 
> 
> > ```
> > running build
> > 
> > ```
> 
> > 
> 
> > ```
> > running build_py
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build\lib.win-amd64-2.7
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\categories.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\contour.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\core.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\fast_project.py -> build\lib.win-amd64-2.7\abstra
> > 
> > ```
> 
> > ct\_rendering
> 
> > 
> 
> > ```
> > copying abstract_rendering\general.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\geometry.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\glyphset.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\infos.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\numeric.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\numpyglyphs.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\util.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\ __init__.py -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > copying abstract_rendering\_version.txt -> build\lib.win-amd64-2.7\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > running build_ext
> > 
> > ```
> 
> > 
> 
> > ```
> > building 'abstract_rendering.transform' extension
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build\temp.win-amd64-2.7
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build\temp.win-amd64-2.7\Release
> > 
> > ```
> 
> > 
> 
> > ```
> > creating build\temp.win-amd64-2.7\Release\abstract_rendering
> > 
> > ```
> 
> > 
> 
> > ```
> > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > 
> > ```
> 
> > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > C -lstdc++
> 
> > 
> 
> > ```
> > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > 
> > ```
> 
> > code is position independent) [enabled by default]
> 
> > 
> 
> > ```
> > writing build\temp.win-amd64-2.7\Release\abstract_rendering\transform.def
> > 
> > ```
> 
> > 
> 
> > ```
> > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > 
> > ```
> 
> > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > 
> 
> > ```
> > Cannot export inittransform: symbol not defined
> > 
> > ```
> 
> > 
> 
> > ```
> > collect2.exe: error: ld returned 1 exit status
> > 
> > ```
> 
> > 
> 
> > ```
> > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > 
> > ```
> 
> > 
> 
> > ```
> > ----------------------------------------
> > 
> > ```
> 
> > ```
> > Command "C:\Anaconda\python.exe -c "import setuptools, tokenize; __file__ ='c:
> > 
> > ```
> 
> > \users\mbe\appdata\local\temp\pip-build-uxz4dm\abstract-rendering\setup.
> 
> > py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).read().replace(‘\r\n’
> 
> > , ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\appdata\local\temp\pi
> 
> > p-4\_njso-record\install-record.txt --single-version-externally-managed --compile
> 
> > " failed with error code 1 in c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\a
> 
> > bstract-rendering
> 
> > 
> 
> > 
> 
> > 
> 
> > Kind regards
> 
> > Mads
> 
> > Den torsdag den 26. februar 2015 kl. 14.02.29 UTC+1 skrev Damian Avila:
> > 
> > > OK, 2 things:
> 
> > > 1- You need to update blaze to the latest version, if will no work with previous versions
> 
> > > 2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:
> 
> > >
> 
> > > pip install abstract\_rendering
> 
> > >
> 
> > > Please, let me know any update…
> 
> > >
> 
> > > Thanks!
> 
> > >
> 
> > > On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > Hi Damián
> 
> > > >
> 
> > > > 1. Attached is the conda list.
> > > > 2. That does not seem to change anything,
> 
> > > >
> 
> > > > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > > > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > > > Packages:
> 
> > > > ```
> > > > Name | Access | Package Types | Summary
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > ------------------------- | ------------ | --------------- | --------------
> > > > 
> > > > ```
> 
> > > > * * *
> 
> > > > ```
> > > > anaconda/abstract-rendering | public | conda | <Undefined>
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > ilan/abstract-rendering | public | conda | None
> > > > 
> > > > ```
> 
> > > >
> 
> > > > Found 2 packages
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > > > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > > > Name: abstract-rendering
> 
> > > > Summary:
> 
> > > > Access: public
> 
> > > > Package Types: conda
> 
> > > > Versions:
> 
> > > > - 0.4.0
> 
> > > > - 0.5.0
> 
> > > > - 0.5.1
> 
> > > > - 0.3.1
> 
> > > > - 0.1.0
> 
> > > >
> 
> > > > To install this package with conda run:
> 
> > > > ```
> > > > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > > > Fetching package metadata: …
> 
> > > > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > > >
> 
> > > >
> 
> > > > You can search for this package on Binstar with
> 
> > > >
> 
> > > > ```
> > > > binstar search -t conda abstract-rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > >
> 
> > > > ``
> 
> > > >
> 
> > > >
> 
> > > > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > > > 
> > > > > Several things…
> 
> > > > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > > > >
> 
> > > > > AFAIK, this should work in windows too…
> 
> > > > >
> 
> > > > > Cheers.
> 
> > > > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > Thanks Damian,
> 
> > > > > > And if understand correct this only works on Linux and OSx??
> 
> > > > > >
> 
> > > > > > I am trying to get either of these to work:
> 
> > > > > > - abstractrender.py
> 
> > > > > > - census.py
> 
> > > > > > - remote\_image.py
> 
> > > > > > - blaze\_source.py
> 
> > > > > > - serversource.py
> 
> > > > > >
> 
> > > > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > > > For the blaze\_source.py I get the following error:
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > > > Traceback (most recent call last):
> 
> > > > > > File “blaze\_source.py”, line 9, in
> 
> > > > > > from blaze import data
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > > > e\>
> 
> > > > > > from .core import \*
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > > > from datashape.predicates import isunit, isdimension
> 
> > > > > > ImportError: cannot import name isunit
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > ``
> 
> > > > > >
> 
> > > > > > For the serversource.py i get the following error:
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > Traceback (most recent call last):
> 
> > > > > > File “serversource.py”, line 11, in
> 
> > > > > > output\_server(“remotedata”)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > > > session.load\_document(curdoc())
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > > > self.gc()
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > > > self.post\_json(url)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > > > return utils.get\_json(resp)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > > > return response.json()
> 
> > > > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > > > return \_default\_decoder.decode(s)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > > > obj, end = self.raw\_decode(s)
> 
> > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > ``
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > > > >
> 
> > > > > > Thanks
> 
> > > > > > Mads
> 
> > > > > >
> 
> > > > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > > > 
> > > > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > > > 
> > > > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > > Thanks Bryan,
> 
> > > > > > > > > That helped a lot!
> 
> > > > > > > > >
> 
> > > > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > > > >
> 
> > > > > > > > > I ran into a new problem:
> 
> > > > > > > > >
> 
> > > > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > > > from the server I get:
> 
> > > > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > > > >
> 
> > > > > > > > > Bokeh Server Configuration
> 
> > > > > > > > > ==========================
> 
> > > > > > > > > python version : 2.7.8
> 
> > > > > > > > > bokeh version : 0.8.1
> 
> > > > > > > > > listening : localhost:5006
> 
> > > > > > > > > backend : shelve
> 
> > > > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > > > >
> 
> > > > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > > > >
> 
> > > > > > > > > and from the script I get:
> 
> > > > > > > > >
> 
> > > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > > File “census.py”, line 10, in
> 
> > > > > > > > > d = Data(c)
> 
> > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > > > dshape = discover(data)
> 
> > > > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > > > in **call**
> 
> > > > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > > > return c.dshape
> 
> > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > > > >
> 
> > > > > > > > >
> 
> > > > > > > > > Any clue what I did wrong?
> 
> > > > > > > > >
> 
> > > > > > > > > Thanks
> 
> > > > > > > > > Mads
> 
> > > > > > > > >
> 
> > > > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > > > 
> > > > > > > > > > Hi Mads,
> > > > > > > > > > 
> > > > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > > > 
> > > > > > > > > > ```
> > > > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > > > 
> > > > > > > > > > ```
> > > > > > > > > > 
> > > > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > > > 
> > > > > > > > > > Thanks,
> > > > > > > > > > 
> > > > > > > > > > Bryan
> > > > > > > > > > 
> > > > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > > > 
> > > > > > > > > > > Hi all
> > > > > > > > > > 
> > > > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > > > 
> > > > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > > > 
> > > > > > > > > > > "
> > > > > > > > > > 
> > > > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > > > 
> > > > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > > > 
> > > > > > > > > > > "
> > > > > > > > > > 
> > > > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > > > 
> > > > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > > > 
> > > > > > > > > > > Kind regards
> > > > > > > > > > 
> > > > > > > > > > > Mads
> > > > > > > > > > > 
> > > > > > > > > > > –  
> > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > 
> > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > 
> > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > > > 
> > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > > > 
> > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > –
> > > > > > > > > 
> > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > 
> > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > 
> > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > > > 
> > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > –
> > > > > > > > 
> > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > 
> > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > 
> > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > > > 
> > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > >
> 
> > > > > > > –  
> > > > > > > _Damián Avila_
> 
> > > > > > > _Continuum Analytics_
> 
> > > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > > > –
> > > > > > 
> > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > 
> > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > 
> > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > 
> > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > >
> 
> > > > > –  
> > > > > _Damián Avila_
> 
> > > > > _Continuum Analytics_
> 
> > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > –
> > > > 
> > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > 
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > 
> > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io?utm_medium=email&utm_source=footer).
> > > > 
> > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > >
> 
> > > –  
> > > _Damián Avila_
> 
> > > _Continuum Analytics_
> 
> > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > –
> > 
> > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > 
> > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+unsubscribe@continuum.io](mailto:bokeh+unsubscribe@continuum.io).
> > 
> > To post to this group, send email to [bokeh@continuum.io](mailto:bokeh@continuum.io).
> > 
> > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/022c3f56-123a-4d72-a4c4-f0747cea56cc%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/022c3f56-123a-4d72-a4c4-f0747cea56cc%40continuum.io?utm_medium=email&utm_source=footer).
> > 
> > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> –
> 
> _Damián Avila_
> 
> _Continuum Analytics_
> 
> _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![Mads\_Berre](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@Mads\_Berre](https://discourse.bokeh.org/u/Mads_Berre)\
**Post date:** [February 27, 2015, 12:15pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/12 "2015-02-27T12:15:03Z")

</div>

No worries, I can wait!  
I am glad that you guys are developing this tool, I have already made some very nice projects with it, but I really believe that it will be a strong tool for big data visualization!

Please let me know when the AR packages are available!

Mads

> **···**
>
> Den fredag den 27. februar 2015 kl. 12.09.45 UTC+1 skrev Damian Avila:
> 
> > The problem, I guess, should be the missing AR package… people is replicating your AR building problem on windows, so you are not alone 😉  
> > We will provide win conda packages for AR soon… I guess you will need to wait a little bit for it.
> 
> > Btw, thanks for keep trying and let you know the problems you had.
> 
> > 
> 
> > Cheers.
> 
> > On Fri, Feb 27, 2015 at 3:35 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > 
> > > Hi Damián,
> 
> > >
> 
> > > Thanks for you support!
> 
> > >
> 
> > > I have successfully updated blaze. After updating blaze i now get the same error messease for the blaze\_source.py example, as for the others.
> > > 
> > > Still having problems with abstract\_rendering, using pip i get the following error:
> 
> > > C:\Users\mbe\>pip install abstract\_rendering
> 
> > > ``  
> > > Collecting abstract-rendering
> 
> > > Downloading abstract\_rendering-0.5.1.tar.gz
> 
> > > Installing collected packages: abstract-rendering
> 
> > > Running setup.py install for abstract-rendering
> 
> > > ```
> > > building 'abstract_rendering.transform' extension
> > > 
> > > ```
> 
> > > ```
> > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > 
> > > ```
> 
> > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > C -lstdc++
> 
> > > ```
> > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > 
> > > ```
> 
> > > code is position independent) [enabled by default]
> 
> > > ```
> > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > 
> > > ```
> 
> > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > > ```
> > > Cannot export inittransform: symbol not defined
> > > 
> > > ```
> 
> > > ```
> > > collect2.exe: error: ld returned 1 exit status
> > > 
> > > ```
> 
> > > ```
> > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > 
> > > ```
> 
> > > ```
> > > Complete output from command C:\Anaconda\python.exe -c "import setuptools, t
> > > 
> > > ```
> 
> > > okenize; **file** ='c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\abstra
> 
> > > ct-rendering\setup.py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).r
> 
> > > ead().replace(‘\r\n’, ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\a
> 
> > > ppdata\local\temp\pip-4\_njso-record\install-record.txt --single-version-external
> 
> > > ly-managed --compile:
> 
> > > ```
> > > running install
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > running build
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > running build_py
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build\lib.win-amd64-2.7
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\categories.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\contour.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\core.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\fast_project.py -> build\lib.win-amd64-2.7\abstra
> > > 
> > > ```
> 
> > > ct\_rendering
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\general.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\geometry.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\glyphset.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\infos.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\numeric.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\numpyglyphs.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\util.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\ __init__.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > copying abstract_rendering\_version.txt -> build\lib.win-amd64-2.7\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > running build_ext
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > building 'abstract_rendering.transform' extension
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build\temp.win-amd64-2.7
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build\temp.win-amd64-2.7\Release
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > creating build\temp.win-amd64-2.7\Release\abstract_rendering
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > 
> > > ```
> 
> > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > C -lstdc++
> 
> > >
> 
> > > ```
> > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > 
> > > ```
> 
> > > code is position independent) [enabled by default]
> 
> > >
> 
> > > ```
> > > writing build\temp.win-amd64-2.7\Release\abstract_rendering\transform.def
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > 
> > > ```
> 
> > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > >
> 
> > > ```
> > > Cannot export inittransform: symbol not defined
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > collect2.exe: error: ld returned 1 exit status
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > 
> > > ```
> 
> > >
> 
> > > ```
> > > ----------------------------------------
> > > 
> > > ```
> 
> > > ```
> > > Command "C:\Anaconda\python.exe -c "import setuptools, tokenize; __file__ ='c:
> > > 
> > > ```
> 
> > > \users\mbe\appdata\local\temp\pip-build-uxz4dm\abstract-rendering\setup.
> 
> > > py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).read().replace(‘\r\n’
> 
> > > , ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\appdata\local\temp\pi
> 
> > > p-4\_njso-record\install-record.txt --single-version-externally-managed --compile
> 
> > > " failed with error code 1 in c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\a
> 
> > > bstract-rendering
> 
> > >
> 
> > >
> 
> > >
> 
> > > Kind regards
> 
> > > Mads
> 
> > > Den torsdag den 26. februar 2015 kl. 14.02.29 UTC+1 skrev Damian Avila:
> > > 
> > > > OK, 2 things:
> 
> > > > 1- You need to update blaze to the latest version, if will no work with previous versions
> 
> > > > 2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:
> 
> > > >
> 
> > > > pip install abstract\_rendering
> 
> > > >
> 
> > > > Please, let me know any update…
> 
> > > >
> 
> > > > Thanks!
> 
> > > >
> 
> > > > On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > Hi Damián
> 
> > > > >
> 
> > > > > 1. Attached is the conda list.
> > > > > 2. That does not seem to change anything,
> 
> > > > >
> 
> > > > > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > > > > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > > > > Packages:
> 
> > > > > ```
> > > > > Name | Access | Package Types | Summary
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > ```
> > > > > ------------------------- | ------------ | --------------- | --------------
> > > > > 
> > > > > ```
> 
> > > > > * * *
> 
> > > > > ```
> > > > > anaconda/abstract-rendering | public | conda | <Undefined>
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > ```
> > > > > ilan/abstract-rendering | public | conda | None
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > Found 2 packages
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > > > > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > > > > Name: abstract-rendering
> 
> > > > > Summary:
> 
> > > > > Access: public
> 
> > > > > Package Types: conda
> 
> > > > > Versions:
> 
> > > > > - 0.4.0
> 
> > > > > - 0.5.0
> 
> > > > > - 0.5.1
> 
> > > > > - 0.3.1
> 
> > > > > - 0.1.0
> 
> > > > >
> 
> > > > > To install this package with conda run:
> 
> > > > > ```
> > > > > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > > > > Fetching package metadata: …
> 
> > > > > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > > > >
> 
> > > > >
> 
> > > > > You can search for this package on Binstar with
> 
> > > > >
> 
> > > > > ```
> > > > > binstar search -t conda abstract-rendering
> > > > > 
> > > > > ```
> 
> > > > >
> 
> > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > >
> 
> > > > > ``
> 
> > > > >
> 
> > > > >
> 
> > > > > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > > > > 
> > > > > > Several things…
> 
> > > > > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > > > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > > > > >
> 
> > > > > > AFAIK, this should work in windows too…
> 
> > > > > >
> 
> > > > > > Cheers.
> 
> > > > > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > Thanks Damian,
> 
> > > > > > > And if understand correct this only works on Linux and OSx??
> 
> > > > > > >
> 
> > > > > > > I am trying to get either of these to work:
> 
> > > > > > > - abstractrender.py
> 
> > > > > > > - census.py
> 
> > > > > > > - remote\_image.py
> 
> > > > > > > - blaze\_source.py
> 
> > > > > > > - serversource.py
> 
> > > > > > >
> 
> > > > > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > > > > For the blaze\_source.py I get the following error:
> 
> > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > > > > Traceback (most recent call last):
> 
> > > > > > > File “blaze\_source.py”, line 9, in
> 
> > > > > > > from blaze import data
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > > > > >
> 
> > > > > > > from .core import \*
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > > > > from datashape.predicates import isunit, isdimension
> 
> > > > > > > ImportError: cannot import name isunit
> 
> > > > > > >
> 
> > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > ``
> 
> > > > > > >
> 
> > > > > > > For the serversource.py i get the following error:
> 
> > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > Traceback (most recent call last):
> 
> > > > > > > File “serversource.py”, line 11, in
> 
> > > > > > > output\_server(“remotedata”)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > > > > session.load\_document(curdoc())
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > > > > self.gc()
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > > > > self.post\_json(url)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > > > > return utils.get\_json(resp)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > > > > return response.json()
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > > > > return \_default\_decoder.decode(s)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > > > > obj, end = self.raw\_decode(s)
> 
> > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > > > > >
> 
> > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > ``
> 
> > > > > > >
> 
> > > > > > >
> 
> > > > > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > > > > >
> 
> > > > > > > Thanks
> 
> > > > > > > Mads
> 
> > > > > > >
> 
> > > > > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > > > > 
> > > > > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > > > > 
> > > > > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > > > Thanks Bryan,
> 
> > > > > > > > > > That helped a lot!
> 
> > > > > > > > > >
> 
> > > > > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > > > > >
> 
> > > > > > > > > > I ran into a new problem:
> 
> > > > > > > > > >
> 
> > > > > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > > > > from the server I get:
> 
> > > > > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > > > > >
> 
> > > > > > > > > > Bokeh Server Configuration
> 
> > > > > > > > > > ==========================
> 
> > > > > > > > > > python version : 2.7.8
> 
> > > > > > > > > > bokeh version : 0.8.1
> 
> > > > > > > > > > listening : localhost:5006
> 
> > > > > > > > > > backend : shelve
> 
> > > > > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > > > > >
> 
> > > > > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > > > > >
> 
> > > > > > > > > > and from the script I get:
> 
> > > > > > > > > >
> 
> > > > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > > > File “census.py”, line 10, in
> 
> > > > > > > > > > d = Data(c)
> 
> > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > > > > dshape = discover(data)
> 
> > > > > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > > > > in **call**
> 
> > > > > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > > > > return c.dshape
> 
> > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > > > > >
> 
> > > > > > > > > >
> 
> > > > > > > > > > Any clue what I did wrong?
> 
> > > > > > > > > >
> 
> > > > > > > > > > Thanks
> 
> > > > > > > > > > Mads
> 
> > > > > > > > > >
> 
> > > > > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > > > > 
> > > > > > > > > > > Hi Mads,
> > > > > > > > > > > 
> > > > > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > > > > 
> > > > > > > > > > > ```
> > > > > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > > > > 
> > > > > > > > > > > ```
> > > > > > > > > > > 
> > > > > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > > > > 
> > > > > > > > > > > Thanks,
> > > > > > > > > > > 
> > > > > > > > > > > Bryan
> > > > > > > > > > > 
> > > > > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > > > > 
> > > > > > > > > > > > Hi all
> > > > > > > > > > > 
> > > > > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > > > > 
> > > > > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > > > > 
> > > > > > > > > > > > "
> > > > > > > > > > > 
> > > > > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > > > > 
> > > > > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > > > > 
> > > > > > > > > > > > "
> > > > > > > > > > > 
> > > > > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > > > > 
> > > > > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > > > > 
> > > > > > > > > > > > Kind regards
> > > > > > > > > > > 
> > > > > > > > > > > > Mads
> > > > > > > > > > > > 
> > > > > > > > > > > > –  
> > > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > > 
> > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > > 
> > > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > > > > 
> > > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > > > > 
> > > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > > –
> > > > > > > > > > 
> > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > 
> > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > 
> > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > > > > 
> > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > –
> > > > > > > > > 
> > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > 
> > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > 
> > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > > > > 
> > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > >
> 
> > > > > > > > –  
> > > > > > > > _Damián Avila_
> 
> > > > > > > > _Continuum Analytics_
> 
> > > > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > > > > –
> > > > > > > 
> > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > 
> > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > 
> > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/fa564c33-e50c-4e6e-b965-3b8b847aa7bd%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > 
> > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > >
> 
> > > > > > –  
> > > > > > _Damián Avila_
> 
> > > > > > _Continuum Analytics_
> 
> > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > > > –
> > > > > 
> > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > 
> > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > 
> > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/11ec7379-c76a-47e7-be50-aab0b3017af9%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > 
> > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > >
> 
> > > > –  
> > > > _Damián Avila_
> 
> > > > _Continuum Analytics_
> 
> > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > > –
> > > 
> > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > 
> > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > 
> > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > 
> > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/022c3f56-123a-4d72-a4c4-f0747cea56cc%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/022c3f56-123a-4d72-a4c4-f0747cea56cc%40continuum.io?utm_medium=email&utm_source=footer).
> > > 
> > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > 
> 
> > –  
> > _Damián Avila_
> 
> > _Continuum Analytics_
> 
> > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_

---

<div class="post-metadata">

**Author:** ![alexwhitney1986](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/a/c57346/32.png) [@alexwhitney1986](https://discourse.bokeh.org/u/alexwhitney1986)\
**Post date:** [March 17, 2015, 4:36pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/13 "2015-03-17T16:36:43Z")

</div>

Hi all,

Just thought I’d add that I am having the same problems under Linux. It appears that Blaze is making a GET request to the bokeh server at /datashape, but this address is not recognised - in fact this URL appears to exist on the Blaze server, which is not running. Perhaps the bokeh server is supposed to start a Blaze server too?

Alex

> **···**
>
> On Friday, 27 February 2015 12:15:03 UTC, Mads Berre wrote:
> 
> > 
> 
> > No worries, I can wait!  
> > I am glad that you guys are developing this tool, I have already made some very nice projects with it, but I really believe that it will be a strong tool for big data visualization!
> 
> > 
> 
> > Please let me know when the AR packages are available!
> 
> > 
> 
> > Mads
> 
> > Den fredag den 27. februar 2015 kl. 12.09.45 UTC+1 skrev Damian Avila:
> > 
> > > The problem, I guess, should be the missing AR package… people is replicating your AR building problem on windows, so you are not alone 😉  
> > > We will provide win conda packages for AR soon… I guess you will need to wait a little bit for it.
> 
> > > Btw, thanks for keep trying and let you know the problems you had.
> 
> > >
> 
> > > Cheers.
> 
> > > On Fri, Feb 27, 2015 at 3:35 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > 
> > > > Hi Damián,
> 
> > > >
> 
> > > > Thanks for you support!
> 
> > > >
> 
> > > > I have successfully updated blaze. After updating blaze i now get the same error messease for the blaze\_source.py example, as for the others.
> > > > 
> > > > Still having problems with abstract\_rendering, using pip i get the following error:
> 
> > > > C:\Users\mbe\>pip install abstract\_rendering
> 
> > > > ``  
> > > > Collecting abstract-rendering
> 
> > > > Downloading abstract\_rendering-0.5.1.tar.gz
> 
> > > > Installing collected packages: abstract-rendering
> 
> > > > Running setup.py install for abstract-rendering
> 
> > > > ```
> > > > building 'abstract_rendering.transform' extension
> > > > 
> > > > ```
> 
> > > > ```
> > > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > > 
> > > > ```
> 
> > > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > > C -lstdc++
> 
> > > > ```
> > > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > > 
> > > > ```
> 
> > > > code is position independent) [enabled by default]
> 
> > > > ```
> > > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > > 
> > > > ```
> 
> > > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > > > ```
> > > > Cannot export inittransform: symbol not defined
> > > > 
> > > > ```
> 
> > > > ```
> > > > collect2.exe: error: ld returned 1 exit status
> > > > 
> > > > ```
> 
> > > > ```
> > > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > > 
> > > > ```
> 
> > > > ```
> > > > Complete output from command C:\Anaconda\python.exe -c "import setuptools, t
> > > > 
> > > > ```
> 
> > > > okenize; **file** ='c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\abstra
> 
> > > > ct-rendering\setup.py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).r
> 
> > > > ead().replace(‘\r\n’, ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\a
> 
> > > > ppdata\local\temp\pip-4\_njso-record\install-record.txt --single-version-external
> 
> > > > ly-managed --compile:
> 
> > > > ```
> > > > running install
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build_py
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\lib.win-amd64-2.7
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\categories.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\contour.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\core.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\fast_project.py -> build\lib.win-amd64-2.7\abstra
> > > > 
> > > > ```
> 
> > > > ct\_rendering
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\general.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\geometry.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\glyphset.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\infos.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\numeric.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\numpyglyphs.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\util.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\ __init__.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\_version.txt -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build_ext
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > building 'abstract_rendering.transform' extension
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7\Release
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7\Release\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > > 
> > > > ```
> 
> > > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > > C -lstdc++
> 
> > > >
> 
> > > > ```
> > > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > > 
> > > > ```
> 
> > > > code is position independent) [enabled by default]
> 
> > > >
> 
> > > > ```
> > > > writing build\temp.win-amd64-2.7\Release\abstract_rendering\transform.def
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > > 
> > > > ```
> 
> > > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > > >
> 
> > > > ```
> > > > Cannot export inittransform: symbol not defined
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > collect2.exe: error: ld returned 1 exit status
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > ----------------------------------------
> > > > 
> > > > ```
> 
> > > > ```
> > > > Command "C:\Anaconda\python.exe -c "import setuptools, tokenize; __file__ ='c:
> > > > 
> > > > ```
> 
> > > > \users\mbe\appdata\local\temp\pip-build-uxz4dm\abstract-rendering\setup.
> 
> > > > py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).read().replace(‘\r\n’
> 
> > > > , ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\appdata\local\temp\pi
> 
> > > > p-4\_njso-record\install-record.txt --single-version-externally-managed --compile
> 
> > > > " failed with error code 1 in c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\a
> 
> > > > bstract-rendering
> 
> > > >
> 
> > > >
> 
> > > >
> 
> > > > Kind regards
> 
> > > > Mads
> 
> > > > Den torsdag den 26. februar 2015 kl. 14.02.29 UTC+1 skrev Damian Avila:
> > > > 
> > > > > OK, 2 things:
> 
> > > > > 1- You need to update blaze to the latest version, if will no work with previous versions
> 
> > > > > 2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:
> 
> > > > >
> 
> > > > > pip install abstract\_rendering
> 
> > > > >
> 
> > > > > Please, let me know any update…
> 
> > > > >
> 
> > > > > Thanks!
> 
> > > > >
> 
> > > > > On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > Hi Damián
> 
> > > > > >
> 
> > > > > > 1. Attached is the conda list.
> > > > > > 2. That does not seem to change anything,
> 
> > > > > >
> 
> > > > > > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > > > > > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > > > > > Packages:
> 
> > > > > > ```
> > > > > > Name | Access | Package Types | Summary
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > ```
> > > > > > ------------------------- | ------------ | --------------- | --------------
> > > > > > 
> > > > > > ```
> 
> > > > > > * * *
> 
> > > > > > ```
> > > > > > anaconda/abstract-rendering | public | conda | <Undefined>
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > ```
> > > > > > ilan/abstract-rendering | public | conda | None
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > Found 2 packages
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > > > > > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > > > > > Name: abstract-rendering
> 
> > > > > > Summary:
> 
> > > > > > Access: public
> 
> > > > > > Package Types: conda
> 
> > > > > > Versions:
> 
> > > > > > - 0.4.0
> 
> > > > > > - 0.5.0
> 
> > > > > > - 0.5.1
> 
> > > > > > - 0.3.1
> 
> > > > > > - 0.1.0
> 
> > > > > >
> 
> > > > > > To install this package with conda run:
> 
> > > > > > ```
> > > > > > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > > > > > Fetching package metadata: …
> 
> > > > > > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > You can search for this package on Binstar with
> 
> > > > > >
> 
> > > > > > ```
> > > > > > binstar search -t conda abstract-rendering
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > >
> 
> > > > > > ``
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > > > > > 
> > > > > > > Several things…
> 
> > > > > > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > > > > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > > > > > >
> 
> > > > > > > AFAIK, this should work in windows too…
> 
> > > > > > >
> 
> > > > > > > Cheers.
> 
> > > > > > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > Thanks Damian,
> 
> > > > > > > > And if understand correct this only works on Linux and OSx??
> 
> > > > > > > >
> 
> > > > > > > > I am trying to get either of these to work:
> 
> > > > > > > > - abstractrender.py
> 
> > > > > > > > - census.py
> 
> > > > > > > > - remote\_image.py
> 
> > > > > > > > - blaze\_source.py
> 
> > > > > > > > - serversource.py
> 
> > > > > > > >
> 
> > > > > > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > > > > > For the blaze\_source.py I get the following error:
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > File “blaze\_source.py”, line 9, in
> 
> > > > > > > > from blaze import data
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > > > > > >
> 
> > > > > > > > from .core import \*
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > > > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > > > > > from datashape.predicates import isunit, isdimension
> 
> > > > > > > > ImportError: cannot import name isunit
> 
> > > > > > > >
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > > ``
> 
> > > > > > > >
> 
> > > > > > > > For the serversource.py i get the following error:
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > File “serversource.py”, line 11, in
> 
> > > > > > > > output\_server(“remotedata”)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > > > > > session.load\_document(curdoc())
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > > > > > self.gc()
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > > > > > self.post\_json(url)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > > > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > > > > > return utils.get\_json(resp)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > > > > > return response.json()
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > > > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > > > > > return \_default\_decoder.decode(s)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > > > > > obj, end = self.raw\_decode(s)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > > > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > > > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > > > > > >
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > > ``
> 
> > > > > > > >
> 
> > > > > > > >
> 
> > > > > > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > > > > > >
> 
> > > > > > > > Thanks
> 
> > > > > > > > Mads
> 
> > > > > > > >
> 
> > > > > > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > > > > > 
> > > > > > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > > > > > 
> > > > > > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > > > > Thanks Bryan,
> 
> > > > > > > > > > > That helped a lot!
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I ran into a new problem:
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > > > > > from the server I get:
> 
> > > > > > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Bokeh Server Configuration
> 
> > > > > > > > > > > ==========================
> 
> > > > > > > > > > > python version : 2.7.8
> 
> > > > > > > > > > > bokeh version : 0.8.1
> 
> > > > > > > > > > > listening : localhost:5006
> 
> > > > > > > > > > > backend : shelve
> 
> > > > > > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > and from the script I get:
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > > > > File “census.py”, line 10, in
> 
> > > > > > > > > > > d = Data(c)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > > > > > dshape = discover(data)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > > > > > in **call**
> 
> > > > > > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > > > > > return c.dshape
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > > > > > >
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Any clue what I did wrong?
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Thanks
> 
> > > > > > > > > > > Mads
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > > > > > 
> > > > > > > > > > > > Hi Mads,
> > > > > > > > > > > > 
> > > > > > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > > > > > 
> > > > > > > > > > > > ```
> > > > > > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > > > > > 
> > > > > > > > > > > > ```
> > > > > > > > > > > > 
> > > > > > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > > > > > 
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > 
> > > > > > > > > > > > Bryan
> > > > > > > > > > > > 
> > > > > > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > > > > > 
> > > > > > > > > > > > > Hi all
> > > > > > > > > > > > 
> > > > > > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > > > > > 
> > > > > > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > > > > > 
> > > > > > > > > > > > > "
> > > > > > > > > > > > 
> > > > > > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > > > > > 
> > > > > > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > > > > > 
> > > > > > > > > > > > > "
> > > > > > > > > > > > 
> > > > > > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > > > > > 
> > > > > > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > > > > > 
> > > > > > > > > > > > > Kind regards
> > > > > > > > > > > > 
> > > > > > > > > > > > > Mads
> > > > > > > > > > > > > 
> > > > > > > > > > > > > –  
> > > > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > > > 
> > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > > > –
> > > > > > > > > > > 
> > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > > 
> > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > > 
> > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > > > > > 
> > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > > –
> > > > > > > > > > 
> > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > 
> > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > 
> > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > > > > > 
> > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > >
> 
> > > > > > > > > –  
> > > > > > > > > _Damián Avila_
> 
> > > > > > > > > _Continuum Analytics_
> 
> > > > > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > …

---

<div class="post-metadata">

**Author:** ![alexwhitney1986](https://discourse.bokeh.org/letter_avatar_proxy/v4/letter/a/c57346/32.png) [@alexwhitney1986](https://discourse.bokeh.org/u/alexwhitney1986)\
**Post date:** [March 17, 2015, 4:59pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/14 "2015-03-17T16:59:56Z")

</div>

Actually I have figured out my problem - I didn’t have multiuserblazeserver installed. pip-installing that (plus pytables) fixed the problem.

Alex

> **···**
>
> On Friday, 27 February 2015 12:15:03 UTC, Mads Berre wrote:
> 
> > 
> 
> > No worries, I can wait!  
> > I am glad that you guys are developing this tool, I have already made some very nice projects with it, but I really believe that it will be a strong tool for big data visualization!
> 
> > 
> 
> > Please let me know when the AR packages are available!
> 
> > 
> 
> > Mads
> 
> > Den fredag den 27. februar 2015 kl. 12.09.45 UTC+1 skrev Damian Avila:
> > 
> > > The problem, I guess, should be the missing AR package… people is replicating your AR building problem on windows, so you are not alone 😉  
> > > We will provide win conda packages for AR soon… I guess you will need to wait a little bit for it.
> 
> > > Btw, thanks for keep trying and let you know the problems you had.
> 
> > >
> 
> > > Cheers.
> 
> > > On Fri, Feb 27, 2015 at 3:35 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > 
> > > > Hi Damián,
> 
> > > >
> 
> > > > Thanks for you support!
> 
> > > >
> 
> > > > I have successfully updated blaze. After updating blaze i now get the same error messease for the blaze\_source.py example, as for the others.
> > > > 
> > > > Still having problems with abstract\_rendering, using pip i get the following error:
> 
> > > > C:\Users\mbe\>pip install abstract\_rendering
> 
> > > > ``  
> > > > Collecting abstract-rendering
> 
> > > > Downloading abstract\_rendering-0.5.1.tar.gz
> 
> > > > Installing collected packages: abstract-rendering
> 
> > > > Running setup.py install for abstract-rendering
> 
> > > > ```
> > > > building 'abstract_rendering.transform' extension
> > > > 
> > > > ```
> 
> > > > ```
> > > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > > 
> > > > ```
> 
> > > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > > C -lstdc++
> 
> > > > ```
> > > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > > 
> > > > ```
> 
> > > > code is position independent) [enabled by default]
> 
> > > > ```
> > > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > > 
> > > > ```
> 
> > > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > > > ```
> > > > Cannot export inittransform: symbol not defined
> > > > 
> > > > ```
> 
> > > > ```
> > > > collect2.exe: error: ld returned 1 exit status
> > > > 
> > > > ```
> 
> > > > ```
> > > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > > 
> > > > ```
> 
> > > > ```
> > > > Complete output from command C:\Anaconda\python.exe -c "import setuptools, t
> > > > 
> > > > ```
> 
> > > > okenize; **file** ='c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\abstra
> 
> > > > ct-rendering\setup.py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).r
> 
> > > > ead().replace(‘\r\n’, ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\a
> 
> > > > ppdata\local\temp\pip-4\_njso-record\install-record.txt --single-version-external
> 
> > > > ly-managed --compile:
> 
> > > > ```
> > > > running install
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build_py
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\lib.win-amd64-2.7
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\categories.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\contour.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\core.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\fast_project.py -> build\lib.win-amd64-2.7\abstra
> > > > 
> > > > ```
> 
> > > > ct\_rendering
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\general.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\geometry.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\glyphset.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\infos.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\numeric.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\numpyglyphs.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\util.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\ __init__.py -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > copying abstract_rendering\_version.txt -> build\lib.win-amd64-2.7\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > running build_ext
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > building 'abstract_rendering.transform' extension
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7\Release
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > creating build\temp.win-amd64-2.7\Release\abstract_rendering
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > C:\Anaconda\Scripts\gcc.bat -DMS_WIN64 -mdll -O -Wall -IC:\Anaconda\include
> > > > 
> > > > ```
> 
> > > > -IC:\Anaconda\PC -c abstract\_rendering/transform.cpp -o build\temp.win-amd64-2.7
> 
> > > > \Release\abstract\_rendering\transform.o -O3 -Wall -fno-rtti -fno-exceptions -fPI
> 
> > > > C -lstdc++
> 
> > > >
> 
> > > > ```
> > > > abstract_rendering/transform.cpp:1:0: warning: -fPIC ignored for target (all
> > > > 
> > > > ```
> 
> > > > code is position independent) [enabled by default]
> 
> > > >
> 
> > > > ```
> > > > writing build\temp.win-amd64-2.7\Release\abstract_rendering\transform.def
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > C:\Anaconda\Scripts\g++.bat -DMS_WIN64 -shared -s build\temp.win-amd64-2.7\R
> > > > 
> > > > ```
> 
> > > > elease\abstract\_rendering\transform.o build\temp.win-amd64-2.7\Release\abstract\_
> 
> > > > rendering\transform.def -LC:\Anaconda\libs -LC:\Anaconda\PCbuild\amd64 -lpython2
> 
> > > > 7 -lmsvcr90 -o build\lib.win-amd64-2.7\abstract\_rendering\transform.pyd
> 
> > > >
> 
> > > > ```
> > > > Cannot export inittransform: symbol not defined
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > collect2.exe: error: ld returned 1 exit status
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > error: command 'C:\\Anaconda\\Scripts\\g++.bat' failed with exit status 1
> > > > 
> > > > ```
> 
> > > >
> 
> > > > ```
> > > > ----------------------------------------
> > > > 
> > > > ```
> 
> > > > ```
> > > > Command "C:\Anaconda\python.exe -c "import setuptools, tokenize; __file__ ='c:
> > > > 
> > > > ```
> 
> > > > \users\mbe\appdata\local\temp\pip-build-uxz4dm\abstract-rendering\setup.
> 
> > > > py’;exec(compile(getattr(tokenize, ‘open’, open)( **file** ).read().replace(‘\r\n’
> 
> > > > , ‘\n’), **file** , ‘exec’))" install --record c:\users\mbe\appdata\local\temp\pi
> 
> > > > p-4\_njso-record\install-record.txt --single-version-externally-managed --compile
> 
> > > > " failed with error code 1 in c:\users\mbe\appdata\local\temp\pip-build-uxz4dm\a
> 
> > > > bstract-rendering
> 
> > > >
> 
> > > >
> 
> > > >
> 
> > > > Kind regards
> 
> > > > Mads
> 
> > > > Den torsdag den 26. februar 2015 kl. 14.02.29 UTC+1 skrev Damian Avila:
> > > > 
> > > > > OK, 2 things:
> 
> > > > > 1- You need to update blaze to the latest version, if will no work with previous versions
> 
> > > > > 2- It seems you are right about the missing packages in repo.continuum… I saw you have pip installed there, can you try pip installing abstract\_rendering as a workaround for now:
> 
> > > > >
> 
> > > > > pip install abstract\_rendering
> 
> > > > >
> 
> > > > > Please, let me know any update…
> 
> > > > >
> 
> > > > > Thanks!
> 
> > > > >
> 
> > > > > On Thu, Feb 26, 2015 at 4:29 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > Hi Damián
> 
> > > > > >
> 
> > > > > > 1. Attached is the conda list.
> > > > > > 2. That does not seem to change anything,
> 
> > > > > >
> 
> > > > > > I have tried to install the abstract rendeing packet but it seems that it does not exist for 64-bit (see below) ?
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar search -t conda abstract-rendering
> 
> > > > > > Run ‘binstar show \<USER/PACKAGE\>’ to get more details:
> 
> > > > > > Packages:
> 
> > > > > > ```
> > > > > > Name | Access | Package Types | Summary
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > ```
> > > > > > ------------------------- | ------------ | --------------- | --------------
> > > > > > 
> > > > > > ```
> 
> > > > > > * * *
> 
> > > > > > ```
> > > > > > anaconda/abstract-rendering | public | conda | <Undefined>
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > ```
> > > > > > ilan/abstract-rendering | public | conda | None
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > Found 2 packages
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>binstar show anaconda/abstract-rendering
> 
> > > > > > Using binstar api site [https://api.binstar.org](https://api.binstar.org)
> 
> > > > > > Name: abstract-rendering
> 
> > > > > > Summary:
> 
> > > > > > Access: public
> 
> > > > > > Package Types: conda
> 
> > > > > > Versions:
> 
> > > > > > - 0.4.0
> 
> > > > > > - 0.5.0
> 
> > > > > > - 0.5.1
> 
> > > > > > - 0.3.1
> 
> > > > > > - 0.1.0
> 
> > > > > >
> 
> > > > > > To install this package with conda run:
> 
> > > > > > ```
> > > > > > conda install --channel [https://conda.binstar.org/anaconda](https://conda.binstar.org/anaconda) abstract-rendering
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>conda install -c [https://conda.binsta](https://conda.binsta)[r.org/anaconda](http://r.org/anaconda) abstract-rendering
> 
> > > > > > Fetching package metadata: …
> 
> > > > > > Error: No packages found in current win-64 channels matching: abstract-rendering
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > You can search for this package on Binstar with
> 
> > > > > >
> 
> > > > > > ```
> > > > > > binstar search -t conda abstract-rendering
> > > > > > 
> > > > > > ```
> 
> > > > > >
> 
> > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > >
> 
> > > > > > ``
> 
> > > > > >
> 
> > > > > >
> 
> > > > > > Den onsdag den 25. februar 2015 kl. 14.52.42 UTC+1 skrev Damian Avila:
> > > > > > 
> > > > > > > Several things…
> 
> > > > > > > 1. Can you post the conda list from your env to check if all the dependencies are there?
> 
> > > > > > > 1. Can you try using the bokeh-server with the memory backend instead of shelve?
> 
> > > > > > >
> 
> > > > > > > AFAIK, this should work in windows too…
> 
> > > > > > >
> 
> > > > > > > Cheers.
> 
> > > > > > > On Wed, Feb 25, 2015 at 3:42 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > Thanks Damian,
> 
> > > > > > > > And if understand correct this only works on Linux and OSx??
> 
> > > > > > > >
> 
> > > > > > > > I am trying to get either of these to work:
> 
> > > > > > > > - abstractrender.py
> 
> > > > > > > > - census.py
> 
> > > > > > > > - remote\_image.py
> 
> > > > > > > > - blaze\_source.py
> 
> > > > > > > > - serversource.py
> 
> > > > > > > >
> 
> > > > > > > > For the top three first i get the ValueError: Bad Response: NOT FOUND.
> 
> > > > > > > > For the blaze\_source.py I get the following error:
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python blaze\_source.py
> 
> > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > File “blaze\_source.py”, line 9, in
> 
> > > > > > > > from blaze import data
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\__init_\_.py”, line 3, in \<modul
> 
> > > > > > > > >
> 
> > > > > > > > from .core import \*
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\core.py”, line 10, in
> 
> > > > > > > > from .utils import validate, coerce, coerce\_to\_ordered, ordered\_index
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\data\utils.py”, line 7, in
> 
> > > > > > > > from datashape.predicates import isunit, isdimension
> 
> > > > > > > > ImportError: cannot import name isunit
> 
> > > > > > > >
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > > ``
> 
> > > > > > > >
> 
> > > > > > > > For the serversource.py i get the following error:
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python serversource.py
> 
> > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > File “serversource.py”, line 11, in
> 
> > > > > > > > output\_server(“remotedata”)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\plotting.py”, line 379, in output\_server
> 
> > > > > > > > session.load\_document(curdoc())
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 543, in load\_document
> 
> > > > > > > > self.gc()
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 529, in gc
> 
> > > > > > > > self.post\_json(url)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 367, in post\_json
> 
> > > > > > > > return self.execute\_json(‘post’, url, headers=headers, \*\*kwargs)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\session.py”, line 335, in execute\_json
> 
> > > > > > > > return utils.get\_json(resp)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\bokeh\utils.py”, line 41, in get\_json
> 
> > > > > > > > return response.json()
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\requests\models.py”, line 799, in json
> 
> > > > > > > > return json.loads(self.text, \*\*kwargs)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\__init_\_.py”, line 505, in loads
> 
> > > > > > > > return \_default\_decoder.decode(s)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 370, in decode
> 
> > > > > > > > obj, end = self.raw\_decode(s)
> 
> > > > > > > > File “C:\Anaconda\lib\site-packages\simplejson\decoder.py”, line 400, in raw\_decode
> 
> > > > > > > > return self.scan\_once(s, idx=\_w(s, idx).end())
> 
> > > > > > > > simplejson.scanner.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
> 
> > > > > > > >
> 
> > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>
> 
> > > > > > > > ``
> 
> > > > > > > >
> 
> > > > > > > >
> 
> > > > > > > > Thank you all for your fast response and interest in helping me, very much appreciated!
> 
> > > > > > > >
> 
> > > > > > > > Thanks
> 
> > > > > > > > Mads
> 
> > > > > > > >
> 
> > > > > > > > Den tirsdag den 24. februar 2015 kl. 22.09.58 UTC+1 skrev Damian Avila:
> > > > > > > > 
> > > > > > > > > census.py needs the abstract-rendering package… but not completely sure if that’s the failure… in any case, do you have this errors with other server-based examples?
> 
> > > > > > > > > On Tue, Feb 24, 2015 at 12:02 PM, Hugo Shi [hugo....@gmail.com](mailto:hugo....@gmail.com) wrote:
> > > > > > > > > 
> > > > > > > > > > Also i should have docs completed for this by the end of the week
> 
> > > > > > > > > > On Feb 24, 2015 9:55 AM, “Mads Berre” [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> 
> > > > > > > > > > > Thanks Bryan,
> 
> > > > > > > > > > > That helped a lot!
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I don’t mind that it will change just want to see if this is a feature that i can use.
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I ran into a new problem:
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > I have started a Bokeh server and executed census.py
> 
> > > > > > > > > > > from the server I get:
> 
> > > > > > > > > > > c:\Anaconda\Lib\site-packages\into\>bokeh-server --ip localhost
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Bokeh Server Configuration
> 
> > > > > > > > > > > ==========================
> 
> > > > > > > > > > > python version : 2.7.8
> 
> > > > > > > > > > > bokeh version : 0.8.1
> 
> > > > > > > > > > > listening : localhost:5006
> 
> > > > > > > > > > > backend : shelve
> 
> > > > > > > > > > > python options : debug:OFF, verbose:OFF, filter-logs:OFF, multi-user:OFF
> 
> > > > > > > > > > > js options : splitjs:OFF, debugjs:OFF
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/userinfo/ (::1) 36.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/getdocapikey/3b649003-a1b7-4ea1-9fa9-449ef11f9791 (::1) 10.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 POST /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/gc (::1) 40.00ms
> 
> > > > > > > > > > > INFO:tornado.access:200 GET /bokeh/bb/3b649003-a1b7-4ea1-9fa9-449ef11f9791/ (::1) 20.00ms
> 
> > > > > > > > > > > WARNING:tornado.access:404 GET /datashape (::1) 0.00ms
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > and from the script I get:
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > c:\Anaconda\Examples\bokeh\plotting\server\>python census.py
> 
> > > > > > > > > > > Using saved session configuration for [http://localhost:5006/](http://localhost:5006/)
> 
> > > > > > > > > > > To override, pass ‘load\_from\_config=False’ to Session
> 
> > > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > > INFO:bokeh.session:No documents found, creating new document ‘Census’
> 
> > > > > > > > > > > INFO:bokeh.session:got read write apikey
> 
> > > > > > > > > > > INFO:requests.packages.urllib3.connectionpool:Starting new HTTP connection (1):localhost
> 
> > > > > > > > > > > Traceback (most recent call last):
> 
> > > > > > > > > > > File “census.py”, line 10, in
> 
> > > > > > > > > > > d = Data(c)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\interactive.py”, line 63, in Data
> 
> > > > > > > > > > > dshape = discover(data)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\multipledispatch\dispatcher.py”, line 163,
> 
> > > > > > > > > > > in **call**
> 
> > > > > > > > > > > return func(\*args, \*\*kwargs)
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 96, in discover
> 
> > > > > > > > > > > return c.dshape
> 
> > > > > > > > > > > File “C:\Anaconda\lib\site-packages\blaze\server\client.py”, line 83, in dshape
> 
> > > > > > > > > > > raise ValueError(“Bad Response: %s” % reason(response))
> 
> > > > > > > > > > > ValueError: Bad Response: NOT FOUND
> 
> > > > > > > > > > >
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Any clue what I did wrong?
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Thanks
> 
> > > > > > > > > > > Mads
> 
> > > > > > > > > > >
> 
> > > > > > > > > > > Den tirsdag den 24. februar 2015 kl. 15.32.03 UTC+1 skrev Bryan Van de ven:
> > > > > > > > > > > 
> > > > > > > > > > > > Hi Mads,
> > > > > > > > > > > > 
> > > > > > > > > > > > This package is currently available on [binstar.org](http://binstar.org):
> > > > > > > > > > > > 
> > > > > > > > > > > > ```
> > > > > > > > > > > > [https://binstar.org/bokeh/multiuserblazeserver](https://binstar.org/bokeh/multiuserblazeserver)
> > > > > > > > > > > > 
> > > > > > > > > > > > ```
> > > > > > > > > > > > 
> > > > > > > > > > > > Please note this functionality is new and still under development, and some things may change over the next few releases. In particular the package name will almost certainly change (probably to just “blaze-server”).
> > > > > > > > > > > > 
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > 
> > > > > > > > > > > > Bryan
> > > > > > > > > > > > 
> > > > > > > > > > > > > On Feb 24, 2015, at 8:22 AM, Mads Berre [mads....@gmail.com](mailto:mads....@gmail.com) wrote:
> > > > > > > > > > > > 
> > > > > > > > > > > > > Hi all
> > > > > > > > > > > > 
> > > > > > > > > > > > > Just updated to Bokeh 0.8.1 and was excited to try out the blaze examples in "Anaconda\Examples\bokeh\plotting\server"
> > > > > > > > > > > > 
> > > > > > > > > > > > > But when starting the server I get the following error messages:
> > > > > > > > > > > > 
> > > > > > > > > > > > > "
> > > > > > > > > > > > 
> > > > > > > > > > > > > C:\Anaconda\lib\site-packages\bokeh\server\blaze\__init_\_.py:19: UserWarning: could not import multiuser blaze server No module named mbs.views.
> > > > > > > > > > > > 
> > > > > > > > > > > > > This is fine if you do not intend to use blaze capabilities in the bokeh server warnings.warn(msg)
> > > > > > > > > > > > 
> > > > > > > > > > > > > "
> > > > > > > > > > > > 
> > > > > > > > > > > > > This is not fine since I intend to use the blaze capabilities. I cannot seem to find the mbs packet any where?
> > > > > > > > > > > > 
> > > > > > > > > > > > > Can anyone help succeed in executing the examples?
> > > > > > > > > > > > 
> > > > > > > > > > > > > Kind regards
> > > > > > > > > > > > 
> > > > > > > > > > > > > Mads
> > > > > > > > > > > > > 
> > > > > > > > > > > > > –  
> > > > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > > > 
> > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/ed019087-0e1d-43a3-a00d-9d15d558b151%40continuum.io).
> > > > > > > > > > > > 
> > > > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > > > –
> > > > > > > > > > > 
> > > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > > 
> > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > > 
> > > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io](https://groups.google.com/a/continuum.io/d/msgid/bokeh/2ceb5867-d76b-4658-9759-1fcce11f9473%40continuum.io?utm_medium=email&utm_source=footer).
> > > > > > > > > > > 
> > > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > > > –
> > > > > > > > > > 
> > > > > > > > > > You received this message because you are subscribed to the Google Groups “Bokeh Discussion - Public” group.
> > > > > > > > > > 
> > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send an email to [bokeh+un...@continuum.io](mailto:bokeh+un...@continuum.io).
> > > > > > > > > > 
> > > > > > > > > > To post to this group, send email to [bo...@continuum.io](mailto:bo...@continuum.io).
> 
> > > > > > > > > > To view this discussion on the web visit [https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com](https://groups.google.com/a/continuum.io/d/msgid/bokeh/CAMn%3DpDTEFwrghyFvjVcjS9eyKhYrYtxbCi3yuSxuH4GvdXc7DQ%40mail.gmail.com?utm_medium=email&utm_source=footer).
> > > > > > > > > > 
> > > > > > > > > > For more options, visit [https://groups.google.com/a/continuum.io/d/optout](https://groups.google.com/a/continuum.io/d/optout).
> 
> > > > > > > > >
> 
> > > > > > > > > –  
> > > > > > > > > _Damián Avila_
> 
> > > > > > > > > _Continuum Analytics_
> 
> > > > > > > > > _[damian.avila@continuum.io](mailto:damian.avila@continuum.io)_
> 
> > …

---

<div class="post-metadata">

**Author:** ![system](https://discourse-uploads.bokeh.org/original/2X/1/14eb24f9e10e4e9b78e3f10f66c04ffa96446e5a.svg) [@system](https://discourse.bokeh.org/u/system)\
**Post date:** [July 21, 2021, 9:05pm UTC](https://discourse.bokeh.org/t/trying-to-run-blaze-examples/354/15 "2021-07-21T21:05:06Z")

</div>